ایران پروژه

دانلود مقاله Experimental and numerical analysis of buckling in grid composite plates فایل ورد (word) دارای 9 صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است

فایل ورد دانلود مقاله Experimental and numerical analysis of buckling in grid composite plates فایل ورد (word) کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه و مراکز دولتی می باشد.

این پروژه توسط مرکز مرکز پروژه های دانشجویی آماده و تنظیم شده است

توجه : در صورت  مشاهده  بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی دانلود مقاله Experimental and numerical analysis of buckling in grid composite plates فایل ورد (word) ،به هیچ وجه بهم ریختگی وجود ندارد

بخشی از متن دانلود مقاله Experimental and numerical analysis of buckling in grid composite plates فایل ورد (word) :

سال انتشار: 1392
محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
تعداد صفحات: 9
نویسنده(ها):
S K. Motlagh – Msc Student
GH. H Rahimi – Professor
M Rahimi – PHD Student
M Hedayatian – MSc Student

چکیده:

Composite grid structures are a series of bands of attached fibers, widely used in a variety of industries, particularly in manufacture of rockets, satellites and airplanes. Composite grid is the best kind of structures proposed for resistance against axial compressive loads. In this study, buckling characteristics of grid composite plates under axial load have been studied using numerical and experimental methods. In this paper, three parameters of the composite thickness, cells and number of cells is changed three times and the results for different reference samples are compared together. All the specimens were subjected to pure axial loading for the buckling experiment. The boundary condition is simple support and a compressive axial load. Results showed that the buckling load to weight ratio increased by 8 to 79 percent, relative to the reference case. Experimental and numerical results of this study showed that for pure axial loading, the best grid shape for plates is the triangular grid. The samples have been modeled and analyzed in the Abaqus FEM software. Obtained experimental and numerical results were compared and it was seen that the two methods are in good Consent in the results.

کلمات کلیدی :